%20vector%20logo.svg)
The ERE 20 is a true, long life Reference Electrode, which can be cast into the cover concrete to monitor cathodic protection, electrochemical corrosion monitoring probes or the corrosion of steel inside concrete.
Based on proven battery technology, the ERE 20 is a true half-cell using a manganese dioxide electrode in steel housing with an alkaline, chloride-free gel. The steel housing is made of a corrosion resistant material. The pH of the gel corresponds to that of pore water in normal concrete, so errors due to diffusion of ions through the porous plug are eliminated. The potential of ERE 20 is virtually independent of changes in the chemical properties of the concrete. It can, therefore, be used in wet or dry concrete, whether exposed to chlorides or to carbonation.
The ERE 20 can easily be attached to a logger in order to monitor data. Remote monitoring by modem is also possible.
The reinforcing steel to be protected shall be polarised a minimum of 100 mV at anodic locations. When using the polarisation decay method, the decay is determined by interrupting the protective current and monitoring the reinforcement’s potential measured relative to a stable reference electrode.
When the current is interrupted, an immediate voltage shift is the result of eliminating the IR-drop and is not to be included in the polarisation measurements. According to EN 12696 the Polarisation Decay should be met within 24 hours.
The ERE 20 is used to check the correct operation of the cathodic protection in structures. The image below shows a typical curve found on checking a CP-system.
