Geosense Portable Inclinometer
The system utilises modern communication and smart devices to enable the tilt data generated by the probe to be managed, stored and transferred directly from site via FTP, API, email or other communication platforms.
The inclinometer system comprises a slimline detachable probe, a robust elongation-resistant cable, lightweight reel with Bluetooth communication to the smart android readout device, with a user-friendly app, plus storage and carry cases for all components.
The probe is fitted with industry standard MEMS biaxial sensors together with a signal conditioning board allowing the calibration factors to be stored within the probe. A digital output signal via the reel is sent to the Smart android device where it is converted to engineering units.
The double Kevlar® reinforced cable and depth markers have been designed and tested with weight up to 40 kg to ensure their long-term stability.
To ensure data is not compromised by electro-magnetic interference and thus become inaccurate, even on noisy sites, the system has been designed and fitted with full 360 degree EMC protection within the probe, cable and reel and is fully tested in accordance with CE and FCC requirements.
Android Application
-
Setup Wizard
Wizard guides you through setting up sites & boreholes.
-
Collection Guide
Step-by-step guide to ensure correct survey methodology is carried out.
-
Auto Mode
Auto mode provides handsfree automated data recording which ensures consistency & quality of surveys.
-
Graphing Modes
Checksum, cumulative displacement, incremental displacement, mean deviation & absolute position graphs can all be viewed.
-
Data Check
Quick data check available during the survey to highlight any problems.
-
GPS Borehole Location
Borehole location can be set using GPS coordinates.
Specifications
Diameter | 7.5mm |
Weight | 5.8kg/100m |
Minimum break load | 400kgf |
Restraining member | Double Kevlar reinforcement |
Jacket | Polyurethane |
Depth markers | Every 500mm |
Lengths | 30,50,75,100,150m (other available on request) |
Connector | Piston & face seal (30 bar rated) |
Cable
Full Scale Range | ±30° from vertical |
Sensor type | Biaxial MEMS |
Sensor accuracy | ±0.004° (±13.5 arc sec, ±0.07 mm/m) ±0.0125% FS |
Sensor resolution | 0.0005° (2 arc sec, 0.01 mm/m) 0.0017% FS |
Sensor repeatability | ±0.002° (±7.2 arc sec, ±0.037 mm/m) ±0.007% FS |
Output signal | RS-485 Digital BUS |
Output unit | Sine of angle |
Probe gauge length | 500mm |
Probe diameter | 25mm |
Probe length | 680mm |
Probe length (w. Connector) | 800mm |
Probe weight | 1.32kg |
Enclosure rating | IP68 (24 bar) |
Materials | 316 stainless steel |
Probe carry case dimensions | 725 x 200 x 105mm |
Probe carry case weight | 5.6kg |
Cable Reel and Carry Bag
Communication | Bluetooth low energy |
Enclosure rating | IP65 |
Power supply | Ni-MH 12V 1000mAh rechargeable batteries |
Operating time | Minimum 15 hours continuous |
Material | Polycarbonate |
30 to 50m cable diameter | 310mm |
75 to 100m cable diameter | 380mm |
30m cable weight | 5.92kg (including carry case) |
50m cable weight | 7.2kg (including carry case) |
75m cable weight | 9.5kg (including carry case) |
100m cable weight | 10.85kg (including carry case) |
System
Total system accuracy | ± 3mm/30m (within 3° from vertical) |
Total system repeatability | ± 1mm/30m |
Cat S41 readout unit | mm |
Readout data export | CSV (Sine alpha & mm) |
Operating temperature | -40 to +85°C |
CE Directives Compliance | EMC 2014/30/EU Industrial, RED 2014/53/EU, RoHS 2 2011/65/EU |
FCC certification | Part 15 |
Contents
- MEMS Digital probe with case
- Reel & cable with bag
- Spare battery
- Android device
- Wet weather stylus
- Charger & accessories
- 70 & 85mm cable gates
- Cable grips