The Water Level Indicators (Electric Contact Meters) are easily transported, user-friendly and reliable instruments used for measuring water level and total depth in boreholes, wells, observation pipes, reservoirs. They are also used to control pumping tests.
The UTS Series of Pocket Dial Penetrometers are perfect tools to determine the penetration resistance of cohesive soil, especially when various range measurements are required.
The Field Inspection Testing Kit may be purchase with a Pocket Penetrometer and/or a Pocket Vane Tester.
The UTS-0024 Hand Boring and Sampling Set is used for augering down to a depth of 5 meters.
Laarmann Test sieves are produced to comply with the specifications set out by the world's most demanding Standards.
The UTS-2060.SMPR Automatic Direct / Residual Shear Test Machine is motorized and floor mounted, its test range covers the determination of consolidated drained shear strength of a soil material by direct shear.
A Sand Replacement Test Set is used to measure the degree of compaction on site.
The consolidation attributes of soils of low permeability can be determined with a One-dimensional Consolidation test. UTest's Oedometer is suitable to complete such a test.
The Sand Equivalent Shaker is used for the uniform shaking of Sand Equivalent Measuring Cylinders, at a specified rate and stroke.
The Sand Equivalent test set is used to determine empirically the fines content and type in samples of aggregates.
Whether for use in simple drying processes, ageing, curing or general investigations, Scientific ovens provide the ideal solution for diverse thermal applications.
Designed in response to feedback from labs Australia and NZ wide, our mould is the new winner for performance and cost. Accessories are available including collars, surcharges and base plates.
The California Bearing Ratio (CBR) test is a measure of the strength of subgrade soil and highway sub base and subgrade via a penetration test. It is designed for testing cohesive materials with a particle size less than 19mm, in Australia the governing standard is AS 1289.6.1.1. An automatic or multiplex machine is also available.
The California Bearing Ratio (CBR) test is a measure of the strength of subgrade soil and highway sub base and subgrade via a penetration test. It is designed for testing cohesive materials with a particle size less than 19mm, in Australia the governing standard is AS 1289.6.1. A manual or multiplex machine is also available.
The UTG-0130 10 litre capacity Laboratory Mixer is designed for mixing of soil and asphalt samples to be used for mechanical tests such as compaction, indirect tensile, Marshall etc.
The Cone Penetrometer is used to determine the moisture content at which clay soils pass from a plastic to a liquid state and used also for the determination of undrained shear strength.
The plastic limit (PL) is the term used for the lowest moisture content of a soil that will allow a sample to be rolled into threads of 3 mm diameter without the threads breaking.
This test method is used to measure the shrinkage ratio, volumetric shrinkage, shrinkage limit and linear shrinkage.
The UTEST Manual Liquid Limit Apparatus (Casagrande) is an apparatus used to measure the moisture content at which clay soils pass from plastic to liquid state.
The UTS-0235, Linear Shrinkage Mould is 140 mm long and has a radius of 12.5mm. It is used to determine the total linear shrinkage of soils and indicates the plastic properties of soils with low clay content.
Automatic Soil Compactor are designed to compact specimens automatically and uniformly, assuring conformity with Australian standards.
Moulds and rammers are used for determining the relationship between the moisture content and density of compacted soil.
Moulds and rammers are used for determining the relationship between the moisture content and density of compacted soil.
A range of industrial balances available for CMT Lab Testing Requirements.
A Multiplex Machine is used to perform UCS [Uniaxial], Triaxial, CBR and Marshall Tests. The apparatus is capable of doing tests with the speed range of 0.00001 mm/min to 51 mm/min. The base machine designed with a sturdy and compact two column frame, with an adjustable upper cross beam. Additional accessories are required to suit the desired test methods, listed below.
%20vector%20logo.svg)
